|
2010 RV/Mobile Home Spray Adhesive Products |
|
The superior bond strength properties and exceptional tack makes SPM an excellent choice for most permanent or temporary adhesive applications. SPM is resistant to water, combines exceptional tack with high shear strength, is fast drying and has a long working time, making the product ideal for a wide variety of applications. STA'-PUT SPM was designed to be used as s multi-purpose product. The pressure sensitive qualities make this product suitable for a variety of applications within the general construction, manufactured housing, RV, aviation, marine, HVAC, textile, and upholstery industries. It can be used on porous and many non-porous surfaces. The ideal application temperature for STA'-PUT is 70°F/38°C. Part No. - 001-SPM16ACC
|
|
STA'-PUT SPII is a pressure sensitive adhesive specifically formulated for bonding expanded polystyrene foam (EPS) to itself and other materials. Superior bond strength properties and exceptional tack makes STA'-PUT SPII an excellent choice for most temporary and permanent EPS applications. SPII provides high shear strength, heat/ UV stability, water resistance, fast drying and a long working time. STA'-PUT SPII was specifically designed for bonding expanded polystyrene (EPS) to itself or to various substrates. The adhesives pressure and bonding properties make the product suitable for a variety of applications within the manufactured housing, RV, marine, refrigeration, and general construction industries. SPII can also be used for exhibit displays, theater scenery, and various crafts. It can be used on porous and many non-porous surfaces. The ideal application temperature for STA'-PUT is 70°F/38°C. Part No. - 001-SP213ACC
|
|
STA'-PUT SPR was developed to remove over-spray from STA'-PUT adhesives. The product efficiently removes adhesive from a wide variety of surfaces such as laminates, plastics, and metals. SPR also works well to remove laminated materials from surfaces that may have been improperly installed or damaged during installation. When the canister version of SPR is used, adhesive spray guns and hose assemblies can be cleaned. It is recommended that testing be performed on new substrates to determine suitability. The ideal application temperature for STA'-PUT is 70°F/38°C. Part No. - 001-SPR15AC
|
|
The superior bond strength properties and exceptional tack makes SPH an excellent choice for most permanent adhesive applications. SPH has high shear strength, heat/ UV stability, water resistance, fast drying and a long working time. STA'-PUT SPH was specifically designed for bonding high-pressure laminate to various substrates. The adhesive pressure sensitive qualities make the product suitable for a variety of industrial applications including; manufactured housing, general construction, RV, marine, woodworking, furniture, textile, HVAC, and the upholstery industries. It can be used on porous and many non-porous surfaces. The ideal application temperature for STA'-PUT is 70°F/38°C. Part No. - 001-SPH15ACC
|
STA'-PUT
Spray Adhesive (SPM) (Green)
STA'-PUT
Spray Adhesive for Polystyrene Foam (SPII) (Blue)
STA'-PUT
Adhesive Remover (SPR) (Orange)
STA'-PUT
Spray Adhesive Clear (SPH) (Red)